祝 您 幸 福 并 致 谢 !

Henry Liu's Resume
Phone: (209)465-1866 Web: http://members.fortunecity. com/liuhenry66/

OBJECTIVE:
To be hired as an engineer /leader to work on PC, telecom, digital-video, test, or medical instruments projects.
SKILLS::
To design, develop, test, and program PLD, FPGA, PCB, or processor based high-speed digital systems hardware with EDA or associated tools.
EXPERIENCE::
Tech Investigator: @ Home Stockton, CA, USA 1/03 to present

Collect and analyze on the standards(SMPTE,ITU-T,IEEE), status(AC-3,MPEG, HA/DTV,802。11/16), protocols(ATSC,OSI,TCI/IP),and trends for multi-media and data communication.

Write in HTML personal web pages.

Sr. HW Project Leader: @ Larscom Corp. Milpitas, CA, USA 1/01 to 12/02

Designed & simulated E3<->E1 framer for FPGA in VHDL with Aldec/ synplify/ Xilinx/ Altera tools, including FIFO controller, frame, and stuffing codec FSMs for Optical Edge Access Multiplexers.

Corrected PCB traces for SI issues with Hyperlynx tool, including PCB2HYP file trans, collecting/creating IBIS/MOD,simulating models, and terminating overshootings ;

Wrote 2 manuals for trouble-shooting a 4-processor architecture and a SONET network access systems, including two level buses organization, ATM, Ethernet, OC3, T3/E3, IMUX, and T1/E1 LIUs with sch. to PCB graphs, jitter to overshoot photos, and PDH/SDH standards with Word.

Sr. Systems Engineer: @ AIO, Inc. Fremont, CA USA 10/99 to 10/2k
Integrated 104 pin Processor modules to control 6/8 in wafer systems (robotic arms, sensors, and valves);

Designed and installed module tester, AC/DC power supply control and distribution.

Studied data-compression tech (J/MPEG in DCT, VLC, Huffman, Motion -vector), and FEC tech (Hamming, BCH, Reed-Solomon, and TCM) codec algorithms.

Sr. Sys Design Engineer: @ Dell Computer Austin, TX., USA 4/ 98 to 10/99
Designed, simulated, & implemented an arbitrator for PCI master requests in VHDL/ Verilog;
Designed signal integrity matched PCB traces of AGP, USB, and PCI buses for Intel 700MHz chip set based workstation mother board with View-Logic and Allegro tools;

Brought up, and tested LAN, PCI Bridge, AGP (4x) bus, audio and SIO portions with logic / TDR analyzer, diagnostic, BIOS, drivers, Win95 /98 /NT /2K and associated software;

Documented CPU, cache snoop, MCH, ICH, SIO, IRQ, and PW control block diagrams.

Modeled and simulated a target PCI Bus interface in VHDL (register file, data path, decoders, counters, base addr. comp. and state machine) with Warp2;

Electronic Engineer: @ AIO Corp. Fremont, CA. USA 10/ 96 to 2/ 98
Integrated track controls by synthesized VHDL to FPGA on View-Logic with Win95;

Designed timer, trigger, and driver schematics and laid out a PCB with Orcad & Protel;

Studied x-Shift Keying, x-Modulation, base station IS-95CDMA sync, paging, traffic channels (PN code, interleave, repetition, convolution, Walsh table, and CRC blocks) and OFDMA (FFT).

Research Assistant: @ Louisiana Tech University Ruston, LA. USA 9/94 to 5/ 96
Designed and modeled a CTI system with ADPCM code, telephony and SLIC chips, dual processors and parallel to serial coded in VHDL on Synopsys with UNIX;

Improved B8ZS codec and Elastic store for T1 in VHDL on Synario with Win95.

Hardware Engineer: @ Computer Tech Lid. of Academia China Chengdu, 5/ 86 to 3/93
Programmed VGA, ADC, 8259, and image cards in x86 Assembly and C on MS_DOS;
Designed digital synchronous and addr. decoder circuits from PAL TV signal to drive mini-CRT wall with Plot, PALASM and PLDs on XT / DOS.

Electronic Engineer: @ Instru Lid. of Petrochemi. Ministry of China Louyang, 9/82 to 4/ 86
Designed an 8088-based scale and a Z80-based fiber particle density detector; Fixed color TV, VCR, signal generator, gauge, and other instruments.

 EDUCATION::
MSEE: @ Louisiana Tech University, GPA=3.3/4 Ruston, LA, USA, 5/ 96

BSEE: @ Jilin Industrial University, GPA=90/100 Chang chun, China, 8/ 82



刘宏宇 工作简 历

电话: (209)465-1866 网站: http://members.fortunecity. com/liuhenry66/

目标: 应聘到工程师/项目经理职位,主持参与 设计,开发计算机、通讯、数字电视/图像、信号检测、或智能医疗设备等领域的硬 件系统工作

技能: 设计、开发、测试、编程数字PLD, FPGA, PCB, or微机系统的(高速)电路制作项目。

工作经历:
技术调查员 @ 家 里 @ Stockton, 加州, 美国 1/03 to present
收集、分析、整合信息源(语字图)和传播术(无线有线)的标准(SMPTE,ITUT,IEEE), 现状(AC-3,MPEG,HA/DTV,802。11/16),协议(ATSC,OSI,TCI/IP),及趋势。

承担用HTML制作个人网站业务。

高级硬件项目负责人 @ Larscom Corp. Milpitas, 加州, 美国 1/01 to 12/02
用VHDL/Verilog 语言及 Aldec/ synplify/ Xilinx/ Altera 公司设计工具,包括 先进先出控制,帧和插位,编/解码器,有限状态机模块,做IC设计,模拟,校验 E3 <-> E1 转换器,并实现在 FPGA 半导体器件里。参与改进、审核系统硬件的设 计图纸。

用Hyperlynx软件将高速电路PCB文件转换,获取(包括自己编制的)芯片IBIS文件后, 对关键电路作脉冲反映特性模拟。以模拟结果修正关键布线的排列形态,以降低反 射、振荡波的叠加。并配合IC的阻抗特性,保持波形完整,保证信号时序关系在允 许范围内。

编写了2个公司网路介入系统的技术原理,故障分析,维修指导资料,发表在公司网 页。文献附以PDH/SDH结构标准,丰富的电路原理图及详细逻辑实现,印刷板图,关 键器件引线信号超幅,延迟,反射的模拟图和测试图照片,系统1以4个微处理机,2层 总线组织,共享存储器资源,联合对ATM, Ethenet, OC3, T3/E3, IMUX, and T1/E1 接口单元控制。系统2以2个微处理机联合对OC3/T3/T1信号的汇合/分流统一管理。

高级系统工程师/指导人 @ AIO, Inc. Fremont, 加州, 美国 10/99 to 10/2k
设计调试模块测试电路,集成多组电源及分配,汇合数据采集接口至计算机系统,

指导小组按7项工艺流程对机械手,传感器,液体/气体阀门统一组织在7个16位微 处理器里,构成6/8英寸半导体WAFER晶片制造台。

自学数字图像/伴音压缩编/解码器(频率幅度相位调制/解调,行场消隐,边带载波, J/ MPEG 标准 (DCT, VLC, Huffman, Mvector),Hamming, BCH, Reed-Solo)前向纠错编/解码算法)

高级硬件系统设计分析师 @ Dell Computer Austin, 德州., 美国 4/ 98 to 9/99
用VHDL语言设计,模拟,实现PCI总线上对多个主从服务器申请分配逻辑;

用ViewLogic电路和Allegro印刷板工具,设计了能满足信号逻辑和波形完整要求的 计算机工作站里AGP, USB, 和 PCI电路。该电路以Intel 6/700MHz CPU芯片组为核心的98/99年DELL产品;

以逻辑,纳秒实时分析仪,基本操作系统,诊断,驱动软件,视窗98/NT/2K及有 关软件对50块计算机母板上的LAN, PCI 桥, AGP (4x) 总线, 音频 and 超级入出口部份,进行启动,检测,修复。编制了计算机系统的高、中层逻辑器件(CPU, MCH, ICH)机构,中断请求,功率分配,图、表结合的方框图文献;

用VHDL语言,WARP2工具,制作、模拟了(包括寄存器文件,数据通道,计数器, 基本地址比较器,存储地址解码,和状态机)从PCI总线接口逻辑。

电子工程师 @ AIO Corp. Fremont, 加州, 美国 10/ 96 to 2/ 98
以VHDL语言和ViewLogic工具对轨道控制逻辑集成化和编译成可烧进逻辑文件。

用Orcad 和 Protel工具设计定时器,触发器,和功率驱动器 电路板。

自学无线手机基站IS-95CDMA原理(同步、页、交通通道(PN码,交互,重复,卷积,Walsh表格,CRC矫正模块功能)

研究助理 @ Louisiana 理工大学 Ruston, 路州. 美国 9/94 to 5/ 96
在UNIX系统上用VHDL语言和初级Synopsys,设计模拟一个计算机电话信息系统( 包 括 ADPCM 码, 电话SLIC芯片, 双处理器,并,串互转电路)

在视窗95上以Synario工具 VHDL语言改进T1长零信号B8ZS 编/解码器 和 Elastic store.

硬件工程师 @ 中 国科学院成都计算机应用研究所 中国成都市 5/ 87 to 3/93
在MS_DOS下以C和x86汇编语言为图像卡,数码模拟转换,8259中断芯片编程;

为露天大屏幕数字电视墙收集设计对PAL信号的同步,寻码,插码资料,多以PALASM语 言对AMD的可编答7b逻辑器件编程,PLOT 制板,

电子工程师 @ 中 国石化总公司设计研究院设备研究所 中国洛阳市, 9/82 to 4/ 87
与人合作完成?流化态粉末?浓度电脑测试仪器成功(Z80采集的光导纤维 探头对 流动粒状感应的数据,并打印制表,画出变化曲线。)

修理 电视,化工压力温度仪表,信号发生器。

教育学位:
电机工程硕士 @ Louisiana理 工大学, 平均分=3.3/4 Ruston, LA, 美国, 5/ 96
电机工程学士 @ 长 春工业大学, 平均分=90/100 中国长春市, 8/ 82

Below are my work area links下面是我的工作领域连接
 

                           

地址:415 E. Flora St. # 3, Stockton, CA 95202 USA, 电话:209-465-1866
email: [email protected]
欢迎来信联系!!